Eaton C441R User Manual

Also see for C441 Series: User manual

Contents

48User Manual MN04200002EEffective January 2016C441 Ethernet module user manual(C441R, C441T, C441U, C441V)EATON www.eaton.com6.6 EtherNet/IP Object Model Stand Alone I/OWhen the Ethernet module is not connected to a host device suchas the C440, the presented object model is compliant with theODVA Discrete I/O device profile (type: 0x7).Full Profile for Stand Alone OperationThe table below shows the supported classes of the EthernetModule when connected to an S611 soft starter.Class Object # ofInstances Description0x01(hex) Identity 1 Provides module identity object: See detailsbelow.0x02 MessageRouter 1 Internal object implemented per ODVA specifica-tion0x04 AssemblyObject 6 Binds attributes from multiple objects for accesswith a single Implicit (I/O) connection. See detailsbelow.0x06 ConnectionManager 1 Internal object supporting connection manage-ment. Implemented per ODVA specification0x08 DiscreteInput Point 4 Status information for the discrete Inputs. Seedetails in previous section.0x09 DiscreteOutput Point 2 Status and control for the discrete Outputs. Seedetails In previous section.0xF5 TCP/IPInterface 1 Information about the TCP/IP Interface.Implemented per ODVA specification0xF6 EthernetLink 2 Ethernet link object for each of the 2 Ethernetports on the device. Implemented per ODVAspecification.Object DetailsClass 1 (0x01): Identity ObjectInstance Count: 1Instance List: 1Table 89. Stand Alone Identity Object Instant AttributesAttrib NV Access DataType Name Description1 V Get UINT CIPVendorIDODVA Assigned Vendor IdentificationNumber.2 V Get UINT CIPDeviceTypeCIP Defined General Product Type.3 V Get UINT ProductCode Vendor Product Code4 V Get UINT FirmwareRev Com Adapter Firmware Rev.Table 89. Stand Alone Identity Object Instant Attributes (Cont.)Attrib NV Access DataType Name Description5 V Get WORD DeviceStatus This attribute represents the currentstatus of the entire devices. Its valuechanges as the state of the devicechanges.Bit = Definition0 = Owned. True indicates the devicehas an owner.2 = Configured. True indicates theapplication of the device has beenconfigured to do something differentthan out of box default. Does notinclude communication configuration.4-7 = Extended Device Status.8 = Minor Recoverable Fault. Trueindicates the device detected a prob-lem with itself, which is thought to berecoverable.9 = Minor Unrecoverable Fault. Trueindicates the device detected a prob-lem with itself, which is thought to beunrecoverable.10 = Major Recoverable Fault. Trueindicates the device detected aproblem with itself causing a “MajorRecoverable Fault” state.11 = Major Unrecoverable Fault.True indicates the device detected aproblem with itself causing a “MajorUnrecoverable Fault” state.6 NV Set/Get UDINT SerialNumber 32 bit Com Adapter Device SerialNumber.7 V Get SHORT_STRING ProductName ASCII Product Name.8 V Get USINT DeviceState Present State of the Device.Value = Definition0 = Nonexistent1 = Device Self Testing2 = Standby3 = Operational4 = Major Recoverable Fault5 = Major Unrecoverable Fault255 = Default for Get Attributes All.176 NV Set/Get SHORT_STRING AssignedName User Defined ASCII Name.Class 4 (0x04): Assembly ObjectInstance Count: 3Instance List: 3, 32, 107Table 90. Stand Alone Assembly Object Instance AttributesAttrib NV Access DataType Name Description3 V Set/Get Array ofBYTE Data Assembly Data. See sectionsbelow for instance definition.Table 91. Stand Alone Assembly Instance List:Type Instance Usage NameInput 3 Poll Field InputsOutput 32 Poll Field Relay OutputsInput 107 Poll 4In/2Out Assembly