5User Manual MN04200002EEffective January 2016C441 Ethernet module user manual(C441R, C441T, C441U, C441V)EATON www.eaton.comFigure 2. Product Dimensions (Attached to C441 Base Unit)

Introduction

Mounting and Dimensions

C441U and C441V

Connections and switch settings

Connecting To an Ethernet Network

Setting the IP Address Mode

Connecting the I/O points and power supply

S811+ to C441U and C441V

Configuration Reset Button

Configuration

EtherNet/IP Object Model for C440 overload relay

EtherNet/IP Object Model for S811+ Soft Starter

EtherNet/IP Object Model Stand Alone I/O

Modbus TCP and Modbus Serial Protocol Support

Register Definition for the C440 Overload Relay

Register Definition for the S611 Soft Starter

Register Definitions for S811+ Soft Starter

Register Definitions for use as stand alone I/O

Eaton C441R User Manual

C441 Series

PROFIBUS Specifications

Table 2. Product Selection

Table 3. Environmental Ratings of the Module

Table 9. Material Requirement

C441Q and C441S

Figure 2. C441Q and C441S Product Dimensions (Attached to C441 Base Unit)

Figure 3. Mounting of Stand-Alone Model

Figure 4. Stand-Alone Dimensions

Connecting the C441, C440, S611 and S811+ to a PROFIBUS Network

Setting the PROFIBUS Address

Power and I/O Wiring Diagrams for the C441Q and C441S Modules

Figure 10. C441S: 120 Vac Wiring Diagram

Power and I/O Wiring Diagrams for the C441QS and C441SS Modules

PROFIBUS Status Indicators

CONFIGURATION USING THE PROFIBUS CONFIGURATION FILE

C441 Motor Insight Overload Protection Relay

C440 Overload Protection Relay

S611 Soft Starter

S811+ Soft Starter

Cyclic IO Data for C441, C440, S611, S811+ and Stand-Alone I/O

Table 28. Ext Diag Bit Key

Table 31. Ext Diag Bit Key

Setting up the Configuration File in the Simatic Software

Assigning Tag Names to C441 Motor Insight I/O Addresses

Downloading the Program to the Siemens S7 PLC

References

C441R

C441T

C441U

C441V