SmartWire-DT network2102/11 MN05006002Z-ENSmartWire-DT network The relevant SmartWire-DT gateway operates on the Smart-Wire-DT network as a coordinator that assumes the networkmanagement and controls the data transfer procedure. Thespecial SmartWire-DT protocol is used for this purpose.Features of the SmartWire-DT networkTable 1: Features of the SmartWire-DT networkPhysics of the data cable RS485+Network length 600 mNumber of users max. 99 (automatic addressing)Baud rate 125/250 Kbit/sUser data bytes per telegram variable, to max. 1024Cycle time at 125 Kbit/s (2 + (number of user data bytes x 0.1)) msData transfer protocol SmartWire-DT; cyclic, acyclic data transferSmartWire-DT system reliability error-tolerant system, time monitoring 1),slave replacement, telegram repetition etc.Diagnostics Station failure, device failure, replacement troughuniversal module1) Time monitoring for the SmartWire-DT slave and for the coordinator, default watchdog timeout300 ms.If a SmartWire-DT slave receives no valid data from the coordinator after expiry of the timeoutperiod, it sets its outputs to the safe status 0. The coordinator also sets the receive data of amissing SmartWire-DT slave to “0” after expiry of the timeout period.www.comoso.com
