Installation7002/11 MN05006002Z-ENSwitch cabinet bushingUse the switch cabinet bushing for external connection ofthe SmartWire-DT network to a switch cabinet or enclosure.This is not given a slave address. There is voltage reversaland EMC protection for an externally supplied 24 V DCcontrol voltage. The device is screwed into a switch cabinetboring with an mounting diameter of 18.5 mm.Use the SmartWire-DT round cable for connection outside ofthe switch cabinet. So that the connection can be madeeasily made and disconnected, the switch cabinet bushinghas a connection for round connectors with a screw fixingM18 x 0.75 mm, protection type IP67.A switch cabinet bushing with a round socket (type SWD4-SFL8-20) and with a round plug (part no. SWD4-SML8-20) isavailable for supply.h Switch cabinet bushings provide the possibility ofsupplying the 24 V DC control voltage for contactors.i Warning!The protection type specified in the appendix is guaran-teed only if it is correctly mounted! Use connections onlywithin the switch cabinet (the connection for roundconnectors with a screwing fastening is accessible outsideof the switch cabinet).www.comoso.com
