Installation6602/11 MN05006002Z-ENPlug-in connection of the SmartWire-DT roundcableFigure 19: Pluggable connection with enclosure bushings– Incoming SmartWire-DT round cableFitted to the SmartWire-DT round cable with the liveconductors coming from the gateway is a cable socket(type SWD4-SF8-67 straight or part no. SWD4-SF8-67Wangled at 90°) (a “Housing bushing with plug“, page 77).X So fasten the enclosure bushing plugs(part no. SWD4-SM8-20) in the surface mounting enclo-sure on the incoming side (IN).– Outgoing SmartWire-DT round cableIf further SmartWire-DT slaves follow this surface mountingenclosure with SmartWire-DT slaves, a cable plug (part no.SWD4-SM8-67 straight or part no.SWD4-SM8-67W angledat 90°) is fitted to the outgoing SmartWire-DT round cable(a “Housing bushing with socket“, page 78).X So fasten the enclosure bushing socket(part no. SWD4-SF8-20) in the surface mounting enclosureon the outgoing side (OUT).For incoming and outgoing SmartWire-DT round cables(arrow direction) with different installation positions of thesurface mounting enclosure, see the illustration below.132132132INOUTOFFONSWD4-SF8-20SWD4-SM8-20INOUTwww.comoso.com
