Installation9202/11 MN05006002Z-ENUsing the ribbon/round cable adapterThis adapter (part no. SWD4-8FRF-10) is for changing froma ribbon cable to a round cable and vice versa. It is fitted toa top-hat rail or, using the optionally available fixingbrackets ZB4-101-GF1, to a plate. For connecting the roundcable, the adapter has an 8-pin numbered and color-codedspring-loaded terminal connection. The ribbon cable with anattached blade terminal is plugged into the socket.Figure 42: SmartWire-DT blade terminal/round cable adapterwith configuration of the spring-cage terminalconnectiona brown, +15 V DC: device supply voltageb gray, SEL: Select cable for automatic address assignmentto the SmartWire-DT slavesc pink, GND: device supply voltaged red, data Ae blue, data Bf white, GND: device supply voltageg yellow, earth: contactor control voltageh green, +24 V DC: contactor control voltage1 2 3 4 5 6 7 8+ 15 Va b c d e f g hSWD4-8SF2SWD4-8SF2www.comoso.com
