5-100 L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUALPRODUCT SETUP CHAPTER 5: SETTINGS5Figure 5-47: File transfer by IEC 618505.3.5.13 Web server HTTP protocolSETTINGS PRODUCT SETUP COMMUNICATIONS WEB SERVER HTTP PROTOCOLThe L60 contains an embedded web server and can display pages in a web browser. The web pages are organized as aseries of menus that can be accessed starting at the L60 “Main Menu.” Web pages are read-only and are available showingDNP and IEC 60870-5-104 points lists, Modbus registers, event records, fault reports, and so on. First connect the L60 and acomputer to an Ethernet network, then enter the IP address of the L60 Ethernet port in a web browser.To close the port, set the port number to 0.Any change takes effect when the L60 is restarted. WEB SERVER HTTP PROTOCOL HTTP TCP PORTNUMBER(80): 80Range: 0 to 65535 in steps of 1
