Gaggenau BO 451 612 Use And Care Manual

Also see for 400 Series: Use and care manual Use & care manual Quick start guide Assembly instructions Quick start guide

Contents

Gaggenau BO 451 612 Use And Care Manual Manual pdf 18 page image

18en-us Timer functionsO Timer functionsTimer functionsIn the timer menu, set:Š Timerp Stopwatch6 Cooking time (not in the idle state)5 Cooking time end (not in the idle state)Launching the timer menuYou can launch the timer menu from any mode. Only fromthe factory settings, program selection is set to S, thetime menu is not available.Touch the M symbol.The timer menu appears.TimerThe timer runs independently of the other appliancefunctions. You can enter a maximum of 90 minutes.Setting the timer1. Call up the Timer menu.The "Timer" function Š is displayed.2. Turn the rotary selector to set the desired time.3. Start with I.The Timer menu closes and the timer starts to run. Thesymbol for the timer Š appears on the display and thetime can be seen counting down.A signal sounds once the time has elapsed. The audiblesignal ceases if you touch the ™ symbol.You can exit the Timer menu at any time by touching the 'symbol. This way, the settings are lost.Suspend timer:Call up the Timer menu. Select the "Timer" function withC, select Š, and touch the H symbol. To let the timer runon, touch the I symbol.Switch off the timer early:Call up the Timer menu. Select the "Timer" function withC, select Š, and touch the Ž symbol.StopwatchThe stopwatch runs independently of the other appliancefunctions.The stopwatch counts up from 0 seconds to 90 minutes.It has a pause function. Therefore, you can stop the timerin between times.Starting the stopwatch1. Launch the timer menu.2. With C, select the "Stopwatch" function p.3. Start with I.The timer menu is closed and the time runs. The psymbol and the elapsing timer are shown in the display.7LPHU6WRSZDWFK