6 - WPT PAGES135190-00357-00 Rev GAirport Departures3. Turn the small right knob to display a windowof available departures for the selected airport.Continue turning the small right knob toselect the desired departure.4. Press ENT. The cursor moves to the runwayfield.5. Turn the small right knob to display awindow of available runways. Continue turn-ing the small right knob to select the desiredrunway.With the cursor on the “RUNWAY” field, turnthe small right knob to display a list of avail-able runways.NOTE: “ALL” may appear in the runway ifeld, indicat-ing the departure procedure applies to all runways.For airports with parallel runways, “B” may appearat the end of the runway designation to indicate thedeparture procedure applies to both runways.6. Press ENT. The cursor moves to the transitions(TRANS) field.7. Turn the small right knob to display a windowof available transitions. Continue turning thesmall right knob to select the desired transi-tion.With the “TRANS” field highlighted, turnthe small right knob to select the desiredtransition.8. Press ENT. To remove the flashing cursor, pressthe small right knob.Airport Departure Page OptionsThe following option is available for the AirportDeparture Page, by pressing the MENU key:Load into Active FPL?As described earlier in this section.Select Next FPL Apt?As described earlier in this section.Select Destination Apt?As described earlier in this section.
