4 - FLIGHT PLANS68 190-00357-00 Rev GFrom the Flight Plan Catalog, press MENU todisplay the options menu and select “CreateNew Flight Plan?”.4. A blank flight plan page appears for the firstempty storage location. Use the small andlarge right knobs to enter the identifier ofthe departure waypoint and press ENT.5. Repeat step #4 above to enter the identifierfor each additional flight plan waypoint.Use the small and large right knobs to enterthe identifier of each flight plan waypoint.6. Once all waypoints have been entered, pressthe small right knob to return to the FlightPlan Catalog.CrossfillCrossfill? allows you to transfer a direct-to destina-tion, the active flight plan including VNAV parameters,any stored flight plan, or user waypoints to a second400W-series or 500W-series Garmin unit.See Section 9 - Aux Pages - Flight Planning - CrossfillOperation for additional details on using the“Crossfill?” option.Copying Flight PlansCopy Flight Plan? allows you to copy the selectedflight plan to a new flight plan location. The copyfunction is useful for duplicating an existing flight planbefore making changes.If you wish to save a flight plan currently locatedin “flight plan 00”, copy it to an open catalog location(1-19) before the flight plan is cancelled, overwrittenor erased.Use the “Copy Flight Plan?” option to savea copy of a flight plan to another memorylocation. This is useful for saving the activeflight plan, or to save a stored flight planbefore editing.NOTE: Once a flight plan is activated, it is copied to“flight plan 00” and overwrites the previous contentsof the flight plan memory location.Copying / Deleting
