6 - WPT PAGES145190-00357-00 Rev GUser Waypoint ListDelete User Waypoint? allows you to delete theselected waypoint from memory.To delete a user waypoint:1. Select the desired waypoint on the UserWaypoint Page and press MENU to displaythe User Waypoint Page Options.2. Turn the large right knob to select “DeleteUser Waypoint?” and press ENT. Press ENTagain to confirm.Select “Delete User Waypoint?” to deletethe selected waypoint from memory.Crossfill? allows you to transfer user waypointsbetween two 400W/500W-series units in a dualunit installation.See Section 9 - Aux Pages - Flight Planning -Crossfill Operation for additional details on usingthe “Crossfill?” option.User Waypoint ListThe User Waypoint List allows you to review,modify, rename or delete a selected user waypoint, orto delete all user waypoints currently stored in memory.At the top of the page are indications for number ofwaypoint locations used and available memory.To review and/or modify a user waypoint from theUser Waypoint List:1. Select the User Waypoint List.2. Turn the large right knob to highlight thedesired user waypoint.3. Press ENT to display the User Waypoint Pagefor the selected waypoint. From this page youmay review all information defining the way-point and its position.4. To modify the waypoint’s position or referencewaypoint information. (Keep in mind thatyou’ve already selected a User Waypoint Pagewhich displays the desired user waypoint, soyou may skip the first two steps of the proce-dure example.)5. To exit the User Waypoint Page, turn the largeright knob to highlight “Done?” and pressENT.
