4 - FLIGHT PLANS71190-00357-00 Rev GChange the displayed data using the “Change Fields?” option.Highlight the data field you wish to change and turn the smallright knob to display available data types.5. Press the small right knob to remove the cursor.To restore factory default settings for data fieldson the Active Flight Plan Page:1. With the Active Flight Plan Page displayed,press MENU to display the Active Flight PlanPage Options window.2. Turn the large right knob to highlight“Restore Defaults?” and press ENT.Active Flight Plan OptionsThe following options (some covered on the pre-ceding pages) are available for the active flight plan:• Activate Leg• Crossfill• Copy Flight Plan• Invert Flight Plan• Delete Flight Plan• Select Approach• Select Arrival• Select Departure• Remove Approach• Remove Arrival• Remove Departure• Closest Point of Flight Plan• Parallel Track• Change Fields• Restore DefaultsActivate LegActivate Leg? activates/reactivates the flight planand selects the highlighted leg as the “active leg” (theleg which is currently used for navigation guidance).“Activate Leg?” selects the highlighted flight plan leg as theleg currently in use for navigation guidance (even if it isn’t theclosest leg).To activate a flight plan along a specific leg:1. From the Active Flight Plan Page, press thesmall right knob to activate the cursor andturn the large right knob to highlight thedesired destination waypoint.2. Press MENU, select the “Activate Leg?” optionfrom the Active Flight Plan Page Options andpress ENT.3. A confirmation window appears. With “Acti-vate?” highlighted, press ENT.CrossfillCrossfill? allows you to transfer a direct-to destina-tion, the active flight plan including VNAV parameters,any stored flight plan, or user waypoints to a second400W-series or 500W-series Garmin unit.See Section 9 - Aux Pages - Flight Planning - CrossfillOperation for additional details on using the“Crossfill?” option.Active Flight Plan Options