3 - DIRECT-TO60 190-00357-00 Rev GSelecting by Facility or CitySelecting a Direct-To Waypoint by FacilityName or CityIn addition to selecting a direct-to waypoint byidentifier, the Select Direct-to Waypoint Page alsoallows you to select airports, VORs and NDBs by facil-ity name or city location. If duplicate entries exist forthe entered facility name or city, additional entries maybe viewed by continuing to turn the small right knobduring the selection process (see Sec 6 WPT Pages -Duplicate waypoints for more information).Identifier, Symboland Region Flight PlanFieldFacility NameCityNearest AirportFieldTo select a direct-to waypoint by facility name orcity:1. Press the direct-to key. The Select Direct-toWaypoint Page appears, with the waypointidentifier field highlighted.Select the third line on the Select Direct-toWaypoint Page to choose your direct-to way-point (airport, VOR, NDB) by city name.2. Turn the large right knob to highlight thefacility name (second line; see above) or thecity (third line; see above) field.3. Use the small and large right knobs to enterthe facility name or city location of the desireddirect-to waypoint. As you spell the facilityname or city, the Spell’N’Find feature selectsthe first entry in the database based upon thecharacters you have entered up to that point.Use the small and large right knobs to enterthe city name. Continue turning the smallright knob to view any additional listings forthe selected city.4. Continue turning the small right knob toscroll through any additional database listingsfor the selected facility name or city. If you scrollpast the desired waypoint, you can also scrollbackwards with the small right knob.5. Press ENT to confirm the selected waypointand ENT (again) to activate the direct-to func-tion.
