6 - WPT PAGES144 190-00357-00 Rev GUser Waypoint Options5. The cursor moves to the radial (RAD) field. Usethe small and large right knobs to change theradial from the reference waypoint, if desired.Press ENT to accept the selected radial.With the radial (RAD) field highlighted, usethe small and large right knobs to enter anew radial from the reference waypoint.6. The cursor moves to the distance (DIS) field. Usethe small and large right knobs to changethe distance from the reference waypoint tothe new user waypoint, if desired. Press ENTto accept the selected distance.7. The cursor moves to the “Modify?” action field.Press ENT to modify the waypoint.8. Press the small right knob to remove theflashing cursor.NOTE: If you attempt to modify or delete awaypoint which is currently a direct-to waypointor the current “from” or “to” waypoint in theactive flight plan, the500W-series unitalerts youwith a “Can’t change an active waypoint” or“Waypoint is active and can’t be deleted” mes-sage. You must ifrst cancel the direct-to or removethe waypoint(s) from the active flight plan beforemodifying or deleting the waypoint(s).User Waypoint Page OptionsThe following User Waypoint Page Options areavailable by pressing the MENU key (with the UserWaypoint Page displayed):View User Waypoint List? displays a list of alluser waypoints currently stored in memory.To view a list of all user waypoints:1. From the User Waypoint Page, press MENU todisplay the User Waypoint Page Options.2. Turn the large right knob to highlight “ViewUser Waypoint List?” and press ENT.Select “View User Waypoint List?” to displaya list of all user waypoints currently storedin memory.3. The top of the User Waypoint List indicates thetotal number of user waypoints currently usedand available memory. If more user waypointsare stored than can be displayed on a singlescreen, turn the large right knob to scrollthrough the User Waypoint List.4. Press the small right knob to return to theUser Waypoint Page.
