Procedure: Table: 001GTH-4013 SXGTH-4017 SX8 GTH-4013 SX GTH-4017 SX Document 57.4403.4200Section 7 - Repair Procedures May 2008TABLE 001Cylinder disassemblyBoom raising cylinder181818 Knock out the pin using a plug of soft material(aluminium, copper, wood, etc.) and extract itthrough the hole on the frame19 Lower the boom onto the adjustable stand toremove the slinging chains20 Sling the cylinder with a textile bridle and removeit from the machine using the bridge craneCAU T I ONTo reassemble the cylinder, repeat the stepsabove in reversed order.Remember to set the circuit under pressurebefore releasing the bridge crane.Courtesy of Crane.Market
