May 2008 Section 3 - Maintenance InspectionsDocument 57.4403.4200 7GTH-4013 SX GTH-4017 SXMAINTENANCE INSPECTIONSModelSerial numberDateHour meterMachine ownerInspected byInspector signatureInspector titleInspector companyInstructions:- Make copies of this page to use for eachinspection.- Select the appropriate checklist(s) for thetype of inspection to be performed.Every 10 hours:: AEvery 50 hours:: A+BEvery 250 hours:: A+B+CEvery 500 hours:: A+B+C+DEvery 1000 hours:: A+B+C+D+EEvery 2000 hours:: A+B+C+D+E+FAt 6000 hours: G- Place a check in the appropriate boxafter each inspection procedure iscompleted.- Use the maintenance tables in thissection and the step-by-step proceduresin section 4 to learn how to performthese inspection.- If any inspection receives an “N”, tagand remove the machine from service,repair and re-inspect it. After repair,place a check in the “R” box.Legend:Y = yes, acceptableN = no, remove from serviceR = repaired.Table E Y N REvery 1000 working hours:E-1 Safety element of engine airfilterE-2 Power divider gearbox oilE-3 Four wheel reduction gears oilE-4 Hydraulic oil and hydraulic oilfilterTable F Y N REvery 2000 working hours:F-1 Change the engine coolantTable G Y N RAt 6000 working hours:G-1 Checking the state of thestructureCourtesy of Crane.Market
