32 GTH-4013 SX GTH-4017 SX Document 57.4403.4200Section 2 - Technical Specification May 2008TECHNICAL SPECIFICATION2.25 HYDROSTATIC TRANSMISSIONCONTROL UNIT CHECK SYSTEMAn electronic control unit gives power to the SAUERhydrostatic transmission; the software PLUS+1 lets tocontrol the transmission.Connect the computer to the cable CAN/USB (cod.55.0602.0331)Joint the cable (cod. 55.0602.0491) to the " DIAGNOSISAUER" connector of the electric line.Start the software "PLUS+1"Turn ON the ignition key or start the engineClick on "+" and open the windows of system (image 1)Proceed as follows:Click FILEClick OPENChoose the diagnostic file (image 1)Select and click INVIOClick on "+" to open the dialog windows (image 2)Check the installed SOFTWARE is right (image 3):Select SYSTEMSelect SYSTEM INFORMATION.Check the customer specific is 401702, (for GTH4013SX and for GTH 4017SX)Open the first control system page:Select SYSTEMSelect ELECTRICALThe window (image 4) shows the electric input/output ofthe system.EXEMPLE:C1P06- input forward speed, C1P07- input rearspeed,the electric input/output are colored refer to speed (images5 - 6)It is possible to check the ROAD/JOB-SITE signal.It is possible to check the windows are ON when theROAD/JOB-SITE push button on the dashboard is pressed(C2P01 - C2P02)123Courtesy of Crane.Market
