June 2005Section 3 • Scheduled Maintenance Procedures3 - 2 TMZ-34/19 Part No. 52075Maintenance Symbols LegendThe following symbols have beenused in this manual to helpcommunicate the intent of theinstructions. When one or more ofthe symbols appears at thebeginning of a maintenanceprocedure, it conveys the meaningbelow.Indicates that tools will be required toperform this procedure.Indicates that new parts will be requiredto perform this procedure.Indicates that a cold motor or pump willbe required to perform this procedure.Indicates that dealer service will berequired to perform this procedure.Pre-delivery Preparation ReportThe pre-delivery preparation report containschecklists for each type of scheduled inspection.Make copies of the Pre-delivery Preparation reportto use for each inspection. Store completed formsas required.Maintenance ScheduleThere are five types of maintenance inspectionsthat must be performed according to a schedule—daily, quarterly, semi-annually, annually, andtwo year. The Scheduled Maintenance ProceduresSection and the Maintenance Inspection Reporthave been divided into five subsections—A, B, C,D, and E. Use the following chart to determinewhich group(s) of procedures are required toperform a scheduled inspection.Inspection ChecklistDaily or every 8 hours AQuarterly or every 250 hours orevery 3000 miles A + BSemi-annually or every 500 hours orevery 6000 miles A + B + CAnnually or every 1000 hours orevery 12000 miles A + B + C + DTwo year or every 2000 hours A + B + C + D + EMaintenance Inspection ReportThe maintenance inspection report containschecklists for each type of scheduled inspection.Make copies of the Maintenance Inspection Reportto use for each inspection. Store completed formsfor three years.SCHEDULED MAINTENANCE PROCEDURES800-610-4101ActionRental.com
