REV BSection 4 • Repair Procedures June 20054 - 48 TMZ-34/19 Part No. 52075Outrigger Components11-1Outrigger ComponentsHow to Remove an OutriggerOutriggers are essential to safe machine operationand machine stability. Operating a machine with adamaged or improperly operating outrigger willresult in death or serious injury.Perform this procedure with theparking brake applied, outriggersin the stowed position and themachine disconnected from thetow vehicle.Models with manual outriggers, platform end:1 Attach a lifting strap from an overhead crane tothe pad-end of the outrigger. Do not apply anylifting pressure.2 Remove the external snap ring and washerfrom the outrigger pivot pin.3 Remove the pin retaining fastener from theoutrigger pivot pin. Do not remove the pin.4 Gently tap the outrigger pivot pin towards theaxle using a soft metal drift until the end of thepin is almost flush with the plastic outriggerswitch guide.5 Place a rod through the hole in the pin and twistto remove the pin. Remove the outrigger pivotpin from the machine.Crushing hazard. The outriggermay fall if not properly supportedwhen the outrigger pivot pin isremoved from the machine.Models with manual outriggers, tongue end:1 Attach a lifting strap from an overhead crane tothe pad end of the outrigger. Do not apply anylifting pressure.2 Remove the external snap ring and washerfrom the outrigger pivot pin.3 Remove the pin retaining fastener from theoutrigger pivot pin. Do not remove the pin.4 Use a soft metal drift to remove the outriggerpivot pin. Remove the outrigger from themachine.Crushing hazard. The outriggermay fall if not properly supportedwhen the outrigger pivot pin isremoved from the machine.800-610-4101ActionRental.com
