REV CJune 2005Section 3 • Scheduled Maintenance Procedures3 - 22 TMZ-34/19 Part No. 52075Checklist C ProceduresC-1Replace theHydraulic Tank Breather Cap -Models with Optional Hydraulic OilThe hydraulic tank is a vented-type tank. Thebreather cap has an internal air filter that canbecome clogged or, over time, can deteriorate. Ifthe breather cap is faulty or improperly installed,impurities can enter the hydraulic system whichmay cause component damage. Extremely dirtyconditions may require that the cap be inspectedmore often.1 Remove and discard the hydraulic tank breathercap.2 Install a new cap onto the tank.C-2Perform Axle Maintenance -ANSI ModelsAxle specifications require that thisprocedure be performed every 6months or 6000 miles, whichevercomes first.Required maintenance procedures and additionalaxle information is available in the Dexter AxleOperation Maintenance Service Manual(Dexter part number LIT-001-00).Dexter Axle Operation Maintenance Service ManualGenie part number 84376800-610-4101ActionRental.com