REV CJune 2005 Section 3 • Scheduled Maintenance ProceduresPart No. 52075 TMZ-34/19 3 - 19CHECKLIST B PROCEDURESB-11Test the Platform Rotation(if equipped)Testing the platform rotation for malfunctions isessential for safe machine operation. The platformrotator is operated by manually turning the handcrank in either a clockwise or counterclockwisedirection.1 Turn the hand crank at the platform in theclockwise direction.Result: The platform should rotate to the rightand operate smoothly without any hesitation orbinding.2 Turn the hand crank at the platform in thecounterclockwise direction.Result: The platform should rotate to the leftand operate smoothly without any hesitation orbinding.B-12Inspect the Hydraulic Tank CapVenting SystemGenie requires that this procedurebe performed quarterly or every250 hours, whichever comes first.Perform this procedure more oftenif dusty conditions exist.A free-breathing hydraulic tank cap is essential forgood machine performance and service life. A dirtyor clogged cap may cause the machine to performpoorly. Extremely dirty conditions may require thatthe cap be inspected more often.1 Remove the breather cap from the hydraulictank.2 Check for proper venting.Result: Air passes through the breather cap.Result: If air does not pass through the cap,clean or replace the cap. Proceed to step 3.When checking for positive tankcap venting, air should pass freelythrough the cap.3 Using a mild solvent, carefully wash the capventing system. Dry using low pressurecompressed air. Repeat step 2.4 Install the breather cap onto the hydraulic tank.800-610-4101ActionRental.com
