REV CJune 2005 Section 3 • Scheduled Maintenance ProceduresPart No. 52075 TMZ-34/19 3 - 7A-4Perform Axle Maintenance -ANSI ModelsAxle specifications require that thisprocedure be performed, initiallyand following a wheel change,after the first 10, 25 and 50 miles.Proper axle maintenance, following the axlemanufacturer's maintenance schedule, is essentialto good axle performance and service life. Failureto perform the maintenance procedures can lead topoor axle performance and component damage.Required maintenance procedures and additionalaxle information is available in the Dexter AxleOperation Maintenance Service Manual(Dexter part number LIT-001-00).Dexter Axle Operation Maintenance Service ManualGenie part number 84376CHECKLIST A PROCEDURESA-3Perform Hitch Maintenance -ANSI ModelsHitch specifications require thatthis procedure be performed daily.Proper hitch maintenance, following the hitchmanufacturer's maintenance schedule, is essentialto good hitch performance and service life. Failureto perform the maintenance procedures can lead topoor hitch performance and component damage.Required maintenance procedures and additionalhitch information is available in theAtwood Model MPD84132 Surge Brake SystemOperation/Maintenance Manual(Atwood part number MPD85778) OR theDemco Model 91 Brake ActuatorsOwner/Operator Manual(Demco part number BH20023).Atwood Model MPD84132 Owner/Operator ManualGenie part number 97403Demco Model 91 Owner/Operator ManualGenie part number 84592800-610-4101ActionRental.com