REV CSection 4 • Repair ProceduresJune 2005Part No. 52075 TMZ-34/19 4 - 52-1PlatformHow toRemove the PlatformModels with Platform Rotate (option):1 Support the platform with an appropriate liftingdevice.2 Remove the fasteners securing the platform tothe platform mount on the platform rotatorassembly.Crushing hazard. The platformmay become unbalanced and fallif not properly supported by alifting device when the fastenersare removed.3 Lift and remove the platform from the mount.Models without Platform Rotate:1 Remove the platform controls from the platformcontrol box mount. Release the clamp on theback of the platform control box and slide thecontrols up and off of the mount.2 Support the platform with an appropriate liftingdevice.3 Remove the toggle pin securing the platform tothe platform mount.Crushing hazard. The platformmay become unbalanced and fallif not properly supported when thetoggle pin is removed.4 Lift and remove the platform from the mount.Platform Components2-2Platform Rotator (if equipped)The platform rotator is a manually-operated gearassembly used to rotate the platform 160 degrees.How toRemove the Platform Rotator1 Remove the platform. See 2-1,How to Remove the Platform.2 Remove the platform controls from the platformcontrol box mount. Release the clamp on theback of the platform control box and slide thecontrols up and off of the mount. Lay theplatform controls off to the side.Component damage hazard.Cables can be damaged if theyare kinked or pinched.2 Support the platform rotator with an appropriatelifting device.3 Remove the toggle pin securing the platform tothe platform mount.Crushing hazard. The platformrotator may become unbalancedand fall if not properly supportedwhen the toggle pin is removed.4 Lift the platform rotator off the platform mount.800-610-4101ActionRental.com
