REV CJune 2005Section 3 • Scheduled Maintenance Procedures3 - 10 TMZ-34/19 Part No. 52075CHECKLIST A PROCEDURESA-9Perform Axle Maintenance -CE ModelsAxle specifications require that thisprocedure be performed 500 kmafter regreasing the wheelbearings.Proper axle maintenance, following the axlemanufacturer's maintenance schedule, is essentialto good axle performance and service life. Failureto perform the maintenance procedures can lead topoor axle performance and component damage.Required maintenance procedures and additionalaxle information is available in the Knott AxleService Manual (Knott part number P005).Knott Axle Service ManualGenie part number 84443A-10Perform 30 Day ServiceThe 30 day maintenance procedure is a one-timeprocedure to be performed after the first 30 days or40 hours of usage. After this interval, refer to themaintenance tables for continued scheduledmaintenance.1 Perform the following maintenance procedures:· A-11 Grease the Turntable RotationBearing and Rotate Gear· B-8 Inspect the Parking Brake· D-1 Check the Turnable RotationBearing Bolts· D-3 Replace the Hydraulic TankReturn Filter800-610-4101ActionRental.com
