1-4To do… Use the command… RemarksEnable PoE for the PoE interface poe enable RequiredDisabled by default.Configure the maximum power forthe PoE interface poe max-power max-powerOptional15,400 milliwatts bydefault.Configure the PoE mode for thePoE interface poe mode signalOptionalsignal (power oversignal cables) bydefault.Return to system view quit —Apply the PoEconfiguration file to oneor more PoE interfacesapply poe-profile { index index |name profile-name } interfaceinterface-rangeinterface interface-typeinterface-numberApplythe PoEconfiguration fileto thePoEinterface(s)Apply the PoEconfiguration file to thecurrent PoE interface inPoE interface viewapply poe-profile { index index |name profile-name }Use either approachz After a PoE configuration file is applied to a PoE interface, other PoE configuration files can nottake effect on this PoE interface.z If a PoE configuration file is already applied to a PoE interface, you must execute the undo applypoe-profile command to remove the application to the interface before deleting or modifying thePoE configuration file.z If you have configured a PoE interface through the command line, you cannot configure it througha PoE configuration file again. If you want to reconfigure the interface through a PoE configurationfile, you must first remove the command line configuration on the PoE interface.z You must use the same mode (command line or PoE configuration file) to configure the poemax-power max-power and poe priority { critical | high | low } commands.Configuring PoE Power ManagementConfiguring PD Power ManagementThe power priority of a PD depends on the priority of the PoE interface. The priority levels of PoEinterfaces include critical, high and low in descending order. Power supply to a PD is subject to PDpower management policies.
