1-8Displaying and Maintaining PoETo do… Use the command… RemarksDisplay the mapping between ID,module, and member ID of all PSEs. display poe deviceDisplay the power state andinformation of the specified PoEinterfacedisplay poe interface [ interface-typeinterface-number ]Display the power information of aPoE interface(s)display poe interface power[ interface-type interface-number ]Display the information of PSE display poe pse [ pse-id ]Display the power state andinformation of all PoE interfacesconnected with the PSEdisplay poe pse pse-id interfaceDisplay the power of all PoE interfacesconnected with the PSE display poe pse pse-id interface powerDisplay all information of theconfigurations and applications of thePoE configuration filedisplay poe-profile [ index index |name profile-name ]Display all information of theconfigurations and applications of thePoE configuration file applied to thespecified PoE interfacedisplay poe-profile interfaceinterface-type interface-numberAvailable inany viewPoE Configuration ExampleNetwork requirementsThe device provides power supply for PDs through PoE interfaces.z GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are connected to IP telephones.z GigabitEthernet 1/0/11 and GigabitEthernet 1/0/12 are connected to access point (AP) devices.z The power priority of GigabitEthernet 1/0/2 is critical.z The power of the AP device connected to GigabitEthernet 1/0/11 does not exceed 9,000milliwatts.
