1-18After completing the above configurations, you can use the following command to view the port securityconfiguration information: display port-security interface gigabitethernet 1/0/1Equipment port-security is enabledTrap is disabledDisableport Timeout: 20sOUI value:GigabitEthernet1/0/1 is link-upPort mode is macAddressElseUserLoginSecureNeedToKnow mode is NeedToKnowOnlyIntrusion Protection mode is NoActionMax MAC address number is 64Stored MAC address number is 0Authorization is permittedUse the following command to view MAC authentication information: display mac-authentication interface gigabitethernet 1/0/1GigabitEthernet1/0/1 is link-upMAC address authentication is enabledAuthenticate success: 3, failed: 7Current online user number is 3MAC ADDR Authenticate state AuthIndex1234-0300-0011 MAC_AUTHENTICATOR_SUCCESS 131234-0300-0012 MAC_AUTHENTICATOR_SUCCESS 141234-0300-0013 MAC_AUTHENTICATOR_SUCCESS 15Use the following command to view 802.1X authentication information: display dot1x interface gigabitethernet 1/0/1Equipment 802.1X protocol is enabledCHAP authentication is enabledEAD quick deploy is disabledConfiguration: Transmit Period 30 s, Handshake Period 15 sQuiet Period 60 s, Quiet Period Timer is disabledSupp Timeout 30 s, Server Timeout 100 sThe maximal retransmitting times 2EAD quick deploy configuration:EAD timeout: 30mTotal maximum 802.1X user resource number is 1024 per slotTotal current used 802.1X resource number is 1GigabitEthernet1/0/1 is link-up802.1X protocol is enabledHandshake is enabledThe port is an authenticator
