1-19Displaying and Maintaining Cluster ManagementTo do… Use the command… RemarksDisplay NDP configurationinformation display ndp [ interface interface-list ]Display the global NTDPinformation display ntdpDisplay the device informationcollected through NTDP display ntdp device-list [ verbose ]Display the detailed NTDPinformation of a specifieddevicedisplay ntdp single-device mac-addressmac-addressView cluster state and statistics display clusterView the standard topologyinformationdisplay cluster base-topology[ mac-address mac-address | member-idmember-number ]View the current blacklist of thecluster display cluster black-listView the information ofcandidate devicesdisplay cluster candidates [ mac-addressmac-address | verbose ]Display the current topologyinformation or the topology pathbetween two devicesdisplay cluster current-topology[ mac-address mac-address[ to-mac-address mac-address ] |member-id member-number [ to-member-idmember-number ] ]Display members in a cluster display cluster members [ member-number |verbose ]Available in anyviewClear NDP statistics reset ndp statistics [ interface interface-list ] Available in userviewCluster Management Configuration ExampleNetwork requirementsz Three switches form cluster abc, whose management VLAN is VLAN 10. In the cluster, Switch Bserves as the management device (Administrator), whose network management interface isVLAN-interface 2; Switch A and Switch C are the member devices (Member).z All the devices in the cluster use the same FTP server and TFTP server on host 63.172.55.1/24,and use the same SNMP NMS and log services on host IP address: 69.172.55.4/24.z Add the device whose MAC address is 000f-e201-0013 to the blacklist.
