1-10To do… Use the command… RemarksEnter system view system-view —In systemviewport-security mac-address securitymac-address interface interface-typeinterface-number vlan vlan-idinterface interface-type interface-numberConfigure asecure MACaddress In interfaceview port-security mac-address securitymac-address vlan vlan-idRequiredUse either approachNo secure MACaddress is configuredby default.The configured secure MAC addresses are saved in the configuration file and will not get lost when theport goes up or goes down. After you save the configuration file, the secure MAC address saved in theconfiguration file are maintained even after the device restarts.Ignoring Authorization Information from the ServerAfter an 802.1X user or MAC authenticated user passes RADIUS authentication, the RADIUS serverdelivers the authorization information to the device. You can configure a port to ignore the authorizationinformation from the RADIUS server.Follow these steps to configure a port to ignore the authorization information from the RADIUS server:To do… Use the command… RemarksEnter system view system-view —Enter Ethernet port view interface interface-typeinterface-number —Ignore the authorizationinformation from the RADIUSserverport-security authorizationignoreRequiredBy default, a port uses theauthorization information fromthe RADIUS server.Displaying and Maintaining Port SecurityTo do… Use the command… RemarksDisplay port securityconfiguration information,operation information, andstatistics about one or moreports or all portsdisplay port-security [ interfaceinterface-list ]Available in anyviewDisplay information aboutsecure MAC addressesdisplay port-security mac-addresssecurity [ interface interface-typeinterface-number ] [ vlan vlan-id ] [ count ]Available in anyview
