2-2Configuration task RemarksConfiguring the Port Number of the HTTPS Service OptionalAssociating the HTTPS Service with an ACL OptionalAssociating the HTTPS Service with an SSL Server PolicyYou need to associate the HTTPS service with a created SSL server policy before enabling the HTTPSservice.Follow these steps to associate the HTTPS service with an SSL server policy:To do… Use the command… RemarksEnter system view system-view —Associate the HTTPS servicewith an SSL server policyip https ssl-server-policypolicy-nameRequiredNot associated by defaultz If the ip https ssl-server-policy command is executed repeatedly, the HTTPS service is onlyassociated with the last specified SSL server policy.z When the HTTPS service is disabled, the association between the HTTPS service and the SSLserver is automatically removed. To enable it again, you need to re-associate the HTTPS servicewith an SSL server policy.z When the HTTPS service is enabled, no modification of its associated SSL server policy takeseffect.Enabling the HTTPS ServiceThe device can act as the HTTPS server and users can access and control the device through the Webfunction only when the HTTPS service is enabled.Follow these steps to enable the HTTPS service:To do… Use the command… RemarksEnter system view system-view —Enable the HTTPS service ip https enable RequiredDisabled by default.
