1-5Displaying and Maintaining RMONTo do… Use the command… RemarksDisplay RMON statistics display rmon statistics[ interface-type interface-number ] Available in any viewDisplay the RMON historycontrol entry and historysampling informationdisplay rmon history[ interface-type interface-number ] Available in any viewDisplay RMON alarmconfiguration informationdisplay rmon alarm[ entry-number ] Available in any viewDisplay RMON prialarmconfiguration informationdisplay rmon prialarm[ entry-number ] Available in any viewDisplay RMON eventsconfiguration informationdisplay rmon event[ entry-number ] Available in any viewDisplay log information for thespecified or all event entries.display rmon eventlog[ entry-number ] Available in any viewRMON Configuration ExampleNetwork requirementsAgent is connected to a configuration terminal through its console port and to a remote NMS across theInternet.Create an entry in the RMON Ethernet statistics table to gather statistics on GigabitEthernet 1/0/1, andenable logging after received bytes exceed the specified threshold.Figure 1-1 Network diagram for RMONConfiguration procedure# Configure RMON to gather statistics for interface GigabitEthernet 1/0/1. system-view[Sysname] interface GigabitEthernet 1/0/1[Sysname-GigabitEthernet1/0/1] rmon statistics 1 owner user1-rmon[Sysname-GigabitEthernet1/0/1] quit# Display RMON statistics for interface GigabitEthernet 1/0/1. display rmon statistics GigabitEthernet 1/0/1Statistics entry 1 owned by user1-rmon is VALID.Interface : GigabitEthernet1/0/1etherStatsOctets : 21657 , etherStatsPkts : 307
