1-14To do… Use the command… RemarksAssociate an IP subnetwith the current VLANip-subnet-vlan[ ip-subnet-index ] ipip-address [ mask ]RequiredThe IP network segment or IP address tobe associated with a VLAN cannot be amulticast network segment or a multicastaddress.Return to system view quit —EnterEthernetinterface viewinterface interface-typeinterface-numberEnter Layer-2aggregateinterface viewinterfacebridge-aggregationinterface-numberEnterinterfaceview orportgroupview Enter portgroup viewport-group manualport-group-nameRequiredUse either command.z In Ethernet interface view, thesubsequent configurations apply tothe current port.z In port group view, the subsequentconfigurations apply to all ports in theport group.z In Layer-2 aggregate interface view,the subsequent configurations applyto the Layer-2 aggregate interface andall its member ports.Configure port link type ashybrid port link-type hybrid RequiredConfigure the hybridport(s) to permit thespecified IP subnet-basedVLANs to pass throughport hybrid vlanvlan-id-list { tagged |untagged }RequiredAssociate the hybridport(s) with the specifiedIP subnet-based VLANport hybridip-subnet-vlan vlanvlan-idRequiredAfter you configure a command on a Layer-2 aggregate interface, the system starts applying theconfiguration to the aggregate interface and its aggregation member ports. If the system fails to do thaton the aggregate interface, it stops applying the configuration to the aggregation member ports. If it failsto do that on an aggregation member port, it simply skips the port and moves to the next port.Displaying and Maintaining VLANTo do... Use the command… RemarksDisplay VLAN informationdisplay vlan [ vlan-id1 [ to vlan-id2 ] |all | dynamic | interfaceinterface-typeinterface-number.subnumber |reserved | static ]Available in any viewDisplay VLAN interfaceinformationdisplay interface vlan-interface[ vlan-interface-id ] Available in any viewDisplay hybrid ports or trunkports on the device display port { hybrid | trunk } Available in any view
