1-24NQA entry(admin admin, tag test) test results:Destination IP address: 10.2.2.2Send operation times: 10 Receive response times: 10Min/Max/Average round trip time: 2/5/3Square-Sum of round trip time: 96Last succeeded probe time: 2007-08-23 15:00:01.2Extended results:Packet lost in test: 0%Failures due to timeout: 0Failures due to disconnect: 0Failures due to no connection: 0Failures due to sequence error: 0Failures due to internal error: 0Failures due to other errors: 0Packet(s) arrived late: 0# Display the history of ICMP echo tests.[DeviceA] display nqa history admin testNQA entry(admin admin, tag test) history record(s):Index Response Status Time370 3 Succeeded 2007-08-23 15:00:01.2369 3 Succeeded 2007-08-23 15:00:01.2368 3 Succeeded 2007-08-23 15:00:01.2367 5 Succeeded 2007-08-23 15:00:01.2366 3 Succeeded 2007-08-23 15:00:01.2365 3 Succeeded 2007-08-23 15:00:01.2364 3 Succeeded 2007-08-23 15:00:01.1363 2 Succeeded 2007-08-23 15:00:01.1362 3 Succeeded 2007-08-23 15:00:01.1361 2 Succeeded 2007-08-23 15:00:01.1DHCP Test Configuration ExampleNetwork requirementsUse the NQA DHCP function to test the time necessary for Switch A to obtain an IP address from theDHCP server Switch B.Figure 1-4 Network diagram for DHCPIP networkNQA clientSwitch BSwitch AVlan-int210.1.1.1/16Vlan-int210.2.2.2/16DHCP serverConfiguration procedure# Create a DHCP test group and configure related test parameters. system-view[SwitchA] nqa entry admin test
