1-9SNMP Configuration ExampleNetwork requirementsz The NMS connects to the agent, a switch, through an Ethernet.z The IP address of the NMS is 1.1.1.2/24.z The IP address of the VLAN interface on the switch is 1.1.1.1/24.z The NMS monitors and manages the agent using SNMPv2c. The agent reports errors or faults tothe NMS.Figure 1-3 Network diagram for SNMPConfiguration procedure1) Configuring the SNMP agent# Configure the SNMP basic information, including version and community name. system-view[Sysname] snmp-agent sys-info version v2c[Sysname] snmp-agent community read public[Sysname] snmp-agent community write private# Configure VLAN-interface 2 (with the IP address of 1.1.1.1/24). Add the port GigabitEthernet 1/0/1 toVLAN 2.[Sysname] vlan 2[Sysname-vlan2] port GigabitEthernet 1/0/1[Sysname-Vlan2] quit[Sysname] interface vlan-interface 2[Sysname-Vlan-interface2] ip address 1.1.1.1 255.255.255.0[Sysname-Vlan-interface2] quit# Configure the contact person and physical location information of the switch.[Sysname] snmp-agent sys-info contact Mr.Wang-Tel:3306[Sysname] snmp-agent sys-info location telephone-closet,3rd-floor# Enable the sending of traps to the NMS with an IP address of 1.1.1.2/24, using public as thecommunity name.[Sysname] snmp-agent trap enable[Sysname] snmp-agent target-host trap address udp-domain 1.1.1.2 udp-port 5000 paramssecurityname public2) Configuring the SNMP NMS
