Icom IC-2820H Instruction Manual

Also see for IC-2820H: Instruction manual Service manual Basic operations Service manual Service manual

Contents

Icom IC-2820H Instruction Manual Manual pdf 104 page image

8713 DV MODE OPERATION (Optional UT-123 is required) Received call signWhen a call is received in DV mode, the calling station andthe repeater call signs being used can be stored into the re-ceived call record. The stored call signs are viewable in thefollowing manner.Up to 20 calls can be recorded.DD Desired call record indicationq Enter RX call sign set mode.• RX CALL SIGN screen is displayed.wRotate [DIAL]† to select the desired record channel.eTo confirm the received call, push [ï](5) several times toselect the desired call sign from CALLER, CALLED,RXRPT1 and RXRPT2.CALLER : The station call sign that made a call.CALLED : The station call sign called by the caller.RXRPT1 : The repeater call sign used by the caller station.RXRPT2 : The repeater call sign linked from RXRPT1.r Push [MENU/LOCK] to return to frequency indication.NOTE: When a call is received in DV mode when thepower save function is activated, the call sign may not bereceived correctly.This is normal, not a malfunction, because of header of thecall sign cannot be detected during power save.Turn the power save function OFF (p. 115) if you want toreceive a call sign correctly even in stand-by condition.✔ For your informationWhen receiving a call, the received station call sign is auto-matically displayed and scrolled in sequence at the bottomline of the function display.This can be turned OFF in display set mode. (p.100)RX01RX01CALLER:CALLER:AAAAAAAAAAAA/:CALLED :SEL:COPY CLR:CLRRX CALL SIGNr RX01RX01CALLED:CALLED:CQCQCQCQCQCQ:RXRPT1 :SEL:COPY CLR:CLRRX CALL SIGNrRX01RX01RXRPT2:RXRPT2::CALLER :SEL:COPY CLR:CLRRX CALL SIGNr RX01RX01RXRPT1:RXRPT1::RXRPT2 :SEL:COPY CLR:CLRRX CALL SIGNrPush• Station call sign • Called station call sign• Repeater 1 call sign• Repeater 2 call signMENU screen ➪ RX CALL SIGN(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)