Icom IC-2820H Instruction Manual

Also see for IC-2820H: Instruction manual Service manual Basic operations Service manual Service manual

Contents

Icom IC-2820H Instruction Manual Manual pdf 65 page image

486CALL CHANNEL OPERATION12345678910111213141516171819 Call channel selectionCall channel is pre-programmed memory channel that can beaccessed by simply pushing call channel button.➥ Push [M/CALL•MW] sev-eral times to select thecall channel mode thenrotate the same band’s[DIAL] to select the de-sired call channel.• “C0” or “C1” appears in-stead of memory channelnumber indication.• Push the [M/CALL•MW]several times to select mem-ory mode, or push the sameband’s [V/MHz•SCAN] to se-lect VFO mode.➥ Push and hold [MR/CALL] for 1 sec. to selectthe call channel mode then push [Y]/[Z] toselect the desired call channel in the mainband.• Push [MR/CALL ] to select memory mode, or push[VFO/LOCK] to select VFO mode. Call channel transferringD Call➪VFO/Memoryq Push the desired band’s [M/CALL•MW] several times toselect cal channel mode, then rotate the same band’s[DIAL] to select the desired call channel.• “C0” or “C1” appears.w Push the [M/CALL•MW] for 1 sec., then rotate the [DIAL]to select the memory channel to transfer the contents to.• “X” indicator and memory channel number blink.• To transfer to the VFO mode, select VFO indication with the[DIAL].e Push the [M/CALL•MW] for 1 sec. to transfer the contents.z Push [MR/CALL] for 1 sec. then push [Y]/[Z]to select the desired call channel in the mainband.x Push [FUNC], then [CLR A(MW)] for 1 sec. totransfer the contents.• To transfer to the VFO only.MR/CALLMW[Y]/[Z]MR/CALLDUO BAND TRANSCEIVER i2820“C0” or “C1” appears[DIAL][M/CALL•MW]✔INFORMATIONWhen the VFO mode is selected fromthe call channel, a small “c” appearsinstead of memory channel number.