354 REPEATER OPERATIONThe U.S.A. and Korean versions automatically use standardrepeater settings (duplex ON/OFF, duplex direction, tone encoderON/OFF) when the operating frequency falls within or outsideof the general repeater output frequency range. The offsetand repeater tone frequencies are not changed by the autorepeater function, reset these frequencies, if necessary.D Frequency range and offset direction• U.S.A. version• Korean versionq Push [F• ] to display the function guide.wPush [MENU](V/MHz•SCAN) (Right band’s) to enter MENUscreen.e Rotate [DIAL] to select “SET MODE” then push[MAIN•BAND].rRotate [DIAL] to select “AUTO REPEATER” then push[MAIN•BAND].t Rotate [DIAL] to select the auto repeater setting.[U.S.A. version]:• “ON1” : Activates duplex only. (default)• “ON2” : Activates duplex and tone.• “OFF” : Auto repeater function is turned OFF.[Korean version]:• “ON” : Activates duplex and tone. (default)• “OFF” : Auto repeater function is turned OFF.y Push [BACK](V/MHz•SCAN) (Right band’s) twice to exitfrom set mode.Auto Repeater set: ON1(USA version)FREQUENCY RANGE SHIFT DIRECTION439.000–440.000 MHz “DUP–” appearsFREQUENCY RANGE SHIFT DIRECTION147.000–147.395 MHz “DUP+” appears442.000–444.995 MHz “DUP+” appears447.000–449.995 MHz “DUP–” appears145.200–145.495 MHz146.610–146.995 MHz “DUP–” appears Auto repeater U.S.A./KOREAN versions only
