 Transferring memory contentsThis function transfers a memory channel’s contents to VFO(or another memory/call channel). This is useful when searchingfor signals around a memory channel frequency and for re-calling the offset frequency, subaudible tone frequency etc.D Memory/call➪VFOqSelect the desired band’s (left or right) memory or call chan-nel.➥ Push the desired band’s [M/CALL•MW] several times toselect memory mode or call channel, then rotate thesame band’s [DIAL] to select the desired memory or callchannel.wPush and hold [M/CALL•MW] for 1 sec. to transfer the se-lected memory/call channel contents to the VFO.• VFO mode is selected automatically.z Push [BAND] to select the desired band asthe main band, if necessary.x Select the memory/call channel to betransferred.➥ Push [MR/CALL] to select memory mode,then select the desired memory channelvia [Y]/[Z] or keypad.➥ Push and hold [MR/CALL] for 1 sec. thenpush [Y]/[Z] to select the call channel.c Push [FUNC], then push and hold[ CLR A(MW)] for 1 sec. to transfer the se-lected memory/call channel contents to theVFO.• VFO mode is selected automatically.MR/CALLMW[Y]/[Z]445MEMORY OPERATION12345678910111213141516171819[EXAMPLE]: Transferring memory channel 30 contents to VFO.Push to select memory mode.Front panel operation:HM-133 operation:Push to select memory mode.Rotate for selecting memory channel.Select memory channel.Push and hold (same band’s) for 1 sec.Push then push and hold for 1 sec.M/CALLMWM/CALLMWBANDMAIN

explicit definitions

Remote controller bracket

using the mounting bracket

microphone connection

battery connection

dc power supply connection

antenna installation

i repeater operation

i programming memory channels

PANEL DESCRIPTION

I Function display

function guide indications

main unit

I Microphone keypad

SETTING A FREQUENCY

I Using the tuning dial

I Tuning step selection

I Lock functions

BASIC OPERATION

i squelch attenuator

I Monitor function

single band operation

I One-touch PTT function

I Audio mute function

REPEATER OPERATION

subaudible tones

i offset frequency

i auto repeater

I General

MEMORY OPERATION

i memory bank selection

i memory bank setting

I Transferring memory contents

I Memory clearing

CALL CHANNEL OPERATION

SCAN OPERATION

I Scan edges programming

I Skip channel setting

I Scan resume condition

PRIORITY WATCH

I Programming a DTMF code

I Transmitting a DTMF code

i dtmf speed

tone squelch and pocket beep

i digital code and digital call sign setting

I Pocket beep operation

tone scan

i pager function

i pager operation

code squelch

external dtmf remote

i digital voice mode operation

digital repeater operation

i received call sign

i copying the call sign

message operation

i automatic reply function

i emr communication

i gps operation

d gps message programming

i set mode items

dv set mode items

scan items

display items

sound items

dv gps items

packet items

i weather channel operation

i microphone keys

I Troubleshooting

I Fuse replacement

I Speciﬁcations

specifications and options

Icom IC-2820H Instruction Manual

supplied accessories

quick reference guide

repeater operation

programming memory channels

Function display

Function guide indications

Main unit

Microphone (HM-133)

Microphone keypad

Using the tuning dial

Tuning step selection

Lock functions

Receiving

Selecting output power

squelch attenuator

V/V, U/U simultaneous receive (Para-watch)

Sub band mute/busy beep

Single band operation

Audio mute function

General

Accessing a repeater

Offset frequency

auto repeater

Digital mode operation

DV MODE OPERATION (Optional UT-123 is required)

Digital voice mode operation

About D-STAR system

Digital repeater operation

Received call sign

Copying the call sign

Break-in communication

Message operation

Automatic reply function

EMR communication

Low-speed data communication

DV voice memory

DV automatic detect

MEMORY MODE OPERATION

Programming a memory channel

Memory bank selection

Memory bank setting

Programming memory/bank/scan name

Copying memory contents

Memory clearing

Erasing/transferring bank contents

Programming a call channel

Scan start/stop

Scan edges programming

Scan resume condition

Skip channel setting

Priority watch operation

DTMF MEMORY ENCODER

Transmitting a DTMF tone sequence

DTMF speed

TONE SQUELCH AND POCKET BEEP

DTCS polarity setting

Tone scan

Digital call sign/digital code squelch

PAGER/CODE SQUELCH

Pager operation

Code squelch

EXTERNAL DTMF REMOTE

MENU SCREEN OPERATION

Item list

SET MODE items

DV SET MODE items

SCAN items

DUP/TONE items

DISPLAY items

SOUND items

DV GPS items

PACKET items

GPS-A SET MODE items

Microphone keys

All reset

Data cloning

Time-out timer

packet operation

weather channel operation

GPS operation

Troubleshooting

IC-2820H

specifications

inside views

RECEIVER CIRCUITS

TRANSMITTER CIRCUITS

FREQUENCY SYNTHESIZER

POWER SUPPLY CIRCUITS

PORT ALLOCATIONS

PREPARATION

FREQUENCY ADJUSTMENT

TRANSMIT ADJUSTMENT

RECEIVE ADJUSTMENT

squelch adjustment

parts list

control unit