263BASIC OPERATION12345678910111213141516171819When the diversity operation is in use, connect the samegrade antenna, connected to [ANT1], shuld be connectedto [ANT2].➥ During single band operation with the diversity function ON,the diversity indicator appears as below.With the squelch open in FM mode while receiving a weaksignal, diversity receiving does not work properly. One-touch PTT functionThe PTT switch can be operated as a one-touch PTT switch(each push toggles between transmit/receive). Using thisfunction you can transmit without pushing and holding thePTT switch.To prevent accidental, continuous transmissions with thisfunction, the transceiver has a time-out timer. See p. ?? fordetails.z Push [FUNC] then [ PRIO 3(PTT-M)] to turn theone-touch PTT function ON.• The activity indicator lights green.x Push [PTT] to transmit and push again to re-ceive.• A beep sounds when transmission is started and along beep sounds when returning to receive.c Push [FUNC] then [ PRIO 3(PTT-M)] to turn theone-touch PTT function OFF.• The activity indicator goes out.PTT-MWhile [ANT2] isselected;While [ANT2] isselected;Diversity indicator appears. [M/CALL•MW]
