Icom IC-2820H Instruction Manual

Also see for IC-2820H: Instruction manual Service manual Basic operations Service manual Service manual

Contents

Icom IC-2820H Instruction Manual Manual pdf 24 page image

71 PANEL DESCRIPTION Function guide indicationsThe function guide indications allow you to simplifying a widevariety of function operationD Function guideq MODE KEY [MODE](V/MHz•SCAN) (p. ??)Push to select an operating mode from FM, FM-N, AM,AM-N and DV* in main band.*Available only when the optional UT-123 is installed.w TUNING STEP KEY [TS](M/CALL•MW) (p. ??)Push to display the tuning step selection mode.• 5.0,* 6.25,* 10, 12.5, 15,* 20, 25, 30 and 50 kHz steps are avail-able. *Not selectable in 900 MHz band.e BAND SCOPE KEY [SCP](DUP•MONI) (p. ??)➥ Push to display the simple band scope and sweeps 1time.➥ Push and hold for 1 sec. to display the simple bandscope and sweeps continuously.• Push [SCP](DUP•MONI) momentarily to cancel the sweep.r SCAN SKIP KEY [SKIP](TONE•DTMF) (p. ??)During in memory mode, push to select the scan skip con-dition for the selected memory channel.• “≈” appears when memory skip, “P≈” appears when programskip selection.tMEMORY NAME INDICATION KEY [M.N](LOW•PRIO)(p. ??)Push select the memory name indication condition.• Memory name, frequency and OFF selections are available.y SINGLE WATCH KEY [SNGL](M/CALL•MW) (p. ??)Push select the single watch mode.• Push [DUAL](M/CALL•MW)(for right band) to select the dualwatch mode.u MENU MODE KEY [MENU](V/MHz•SCAN) (p. ??)Push select the menu mode indication.D Function guide 2The function guide 2 indications appear only when the op-tional UT-123 is installed and DV mode is selected.i CALL SIGN SELECT KEY [CS](V/MHz•SCAN) (p. ??)Push to display the call sign selection screen.oRECEIVED CALL SIGN RECORD KEY[CD](M/CALL•MW) (p. ??)Push to display the received call sign record screen.!0 CQ KEY [CQ](DUP•MONI) (p. ??)Push to set “CQCQCQ” as the station call sign for the call.i o !0 !1 !2 !3 uq w e r t y u