8913 DV MODE OPERATION (Optional UT-123 is required) Copying the call signDD Copying the call sign memory contentsThis function is convenient when or modifying a part of thecurrent call sign.NOTE: Make sure that the “EDIT RECORD” item in DV setmode is set to “AUTO” or “SELECT” in advance. (p. 95)qDuring DV mode operation, enter call sign set mode.• CALL SIGN screen is displayed.wRotate [DIAL]† to select “UR,” “R1” or “R2” as desired, thenpush [ï](5)†.eRotate [DIAL]† to select the desired call sign channel to becopied.• U01–U60 and R01–R60 are available.• When “AUTO” is set to “EDIT RECORD” itemr Push [≈≈](6) to select the call sign programming mode.• A blank channel is selected automatically.• The 1st digit of the selected call sign blinks.tEdit or modify the selected call sign as described in “D Sta-tion call sign programming” (p. 36) or “D Repeater call signprogramming” (p. 41).yPush [ï](5) to store the edited/modified call sign into theselected blank channel.NOTE: The message “FULL” is displayed when no blankchannel is available in station or repeater call sign mem-ory.Select the desired call sign channel number as describedin step u of “• When “SELECT” is set to “EDIT RECORD”item” at right-hand page in this case.U21U21 AB†AAAAAAAAAA:SET:SET:SEL:SEL:CUR:CURCLR:CLRCLR:CLRA/a:CHARA/a:CHAR0:CQ0:CQYOUR CALL SIGNYOUR CALL SIGNr A blank channelnumber blinks.MENU screen ➪ CALL SIGN(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)
