Icom IC-E91 Instruction Manual

Also see for IC-E91: Instruction manual Service manual

Contents

42 PANEL DESCRIPTIONDD KEYPADKEY Pushed momentarily Pushed and held for 1 sec.• Inputs digit ‘1’ for frequency input, memory channel selection,etc.• While pushing [PTT], this key sends the DTMF code “1.”• Inputs digit ‘2’ for frequency input, memory channel selection,etc.• While pushing [PTT], this key sends the DTMF code “2.”• Inputs digit ‘3’ for frequency input, memory channel selection,etc.• While pushing [PTT], this key sends the DTMF code “3.”• Inputs digit ‘4’ for frequency input, memory channel selection,etc.• While pushing [PTT], this key sends the DTMF code “4.”• Inputs digit ‘5’ for frequency input, memory channel selection,etc.• While pushing [PTT], this key sends the DTMF code “5.”• Inputs digit ‘6’ for frequency input, memory channel selection,etc.• While pushing [PTT], this key sends the DTMF code “6.”• Displays the simple band scope for a single sweep. (p. 23)• Starts a scan. (p. 75)• Toggles the transmit output power between high and low. (p. 24)- “LOW” appears when low power is selected.- While pushing and holding this key, with [DIAL] rotation selectsthe output power.• Activates the following duplex functions in order.- Minus duplex operation— “–DUP” appears.- Plus duplex operation— “+DUP” appears.- Simplex operation— no duplex indicator appears.- While pushing and holding this key, with [DIAL] rotation selectsthe duplex function.• Turn the frequency skip function ON and OFF in VFO mode, orset the memory channel as the following skip channel in memorymode in order (p. 79).- Skip channel— “SKIP” appears.- Frequency skip channel— “PSKIP” appears.- Non-skip channel— no skip indicator appears.• Turn the memory name or bank name indication ON and OFF.(p. 70)