9211 MENU SCREEN OPERATION DV set mode itemsThe following items are selectable when the optional UT-121is installed.DD Auto replyThis function replies to an individual station call even you areaway from the transceiver.After a manual transmission (pushing [PTT]), the Auto Replysetting returns to OFF automatically.• OFF : No reply is performed even a call is received.(default)• ON : Sets caller’s call sign and reply to the call withthe set own call sign automatically.• VOICE : Sets caller’s call sign and reply to the call withthe recorded audio in REPLY VOICE memory ofDV VOICE MEMO.NOTE: When “ON” or “VOICE” is set to the auto replyfunction, the power save function (p. 88) is turned OFF au-tomatically to receive call sign signal properly.DD Digital codeSets the desired digital code for digital code squelch opera-tion. Total of 100 codes (00–99) are available. (default: 00)DD DV data TXDuring low-speed data operation, auto data transmissionfunction is available. This function transmits when data hasbeen input from PC via the [DATA] jack. (default: PTT)PTTPTTAUTOAUTODV DATA TXPTTPTTAUTOAUTODV DATA TXrr0000DIGITAL CODE9999DIGITAL CODEOFFOFFONONVOICEVOICEAUTO REPLYAUTO REPLYr OFFOFFONONVOICEVOICEAUTO REPLYr

FOREWORD

accessory attachment

panel description

I Function display

battery charging

i regular charging

rapid charging

i optional battery case

I External DC power operation

main band selection

I Mode selection

I Operating band selection

i setting a tuning step

BASIC OPERATION

setting squelch level

i monitor function

band scope

I Transmitting

i lock function

tv channel operation

repeater and duplex operations

I Accessing a repeater

d checking the repeater input signal

i duplex operation

digital mode operation

i digital voice mode operation

digital repeater operation

I Received call sign

i copying the call sign

d copying the call record contents into call sign memory

message operation

I Automatic reply function

i emr communication

i gps operation

d gps message programming

MEMORY/CALL CHANNELS

selecting a call channel

i memory channel programming

I Memory bank setting

i memory bank selection

I Selecting memory/bank name indication

I Copying memory/call contents

i memory clearing

scan operation

i scan edges programming

I Memory scan

memory bank scan

i scan resume condition

priority watch

I Priority watch operation

menu screen operation

menu list

i set mode items

dv set mode items

scan set mode items

display set mode items

sounds set mode items

other functions

i transmitting a dtmf code

clearing a dtmf memory

I Tone frequency and DTCS code

tone squelch

I Digital code and digital call sign setting

I Pocket beep function

tone scan

beep tones

I Auto power OFF

I Time-out timer

I Cloning function

I Resetting

TROUBLESHOOTING

SPECIFICATIONS

installation notes

Icom IC-E91 Instruction Manual

IC-E91

I Battery pack

frequency and channel setting

i accessing a repeater

I Call sign programming

I Digital voice mode operation

I About D-STAR system

I Digital repeater operation

I EMR communication

I Other functions for DV mode operation

I Selecting a call channel

I Memory channel programming

i memory bank setting

I Programming memory/bank/scan name

I Full/band/programmed scan

i memory scan

I Scan resume condition

PRIORITY WATCH

I DUP/TONE set mode items

I Display set mode items

I Sounds set mode items

I Transmitting a DTMF code

I Clearing a DTMF memory

I Setting DTMF transfer speed

OPTIONS

I Optional UT-121 installation