397DV MODE OPERATION (Optional UT-121 is required)7DD When calling the desired stationContinued instruction from step x on page 38.cRotate [DIAL]† to select “UR,” then push [ï](5)†.• YOUR CALL SIGN screen is displayed.vRotate [DIAL]† to select the call sign channel in which de-sired station’s call sign is programmed.• See page 36 for station call sign programming details.bPush [ï](5) to set the station’s call sign and return toCALL SIGN screen.nPush [MENU/LOCK] to return to frequency indication.m Perform the instruction steps t and y on page 38.DD When sending a CQContinued instruction from step x on page 38.cRotate [DIAL]† to select “UR,” then push [ï](5)†.• YOUR CALL SIGN screen is displayed.vRotate [DIAL]† to select the call sign channel in which“CQCQCQ” is programmed.Or, select “U” then push [≈≈](6) and [CQ](0) in sequence toset “CQCQCQ.”bPush [ï](5) to set “CQCQCQ” as the call sign and returnto CALL SIGN screen.nPush [MENU/LOCK] to return to frequency indication.m Perform the instruction step t and y on page 38.UR:CQCQCQUR:CQCQCQR1:R1:R2:NOT USE*R2:NOT USE*MY:MYCALLMY:MYCALL/IC91/IC91CALL SIGNrUR:STATION1UR:STATION1R1:R1:R2:NOT USE*R2:NOT USE*MY:MYCALLMY:MYCALL/IC91/IC91CALL SIGNr†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)1234568910111213141516171819
