Icom IC-E91 Instruction Manual

Also see for IC-E91: Instruction manual Service manual

Contents

184 FREQUENCY AND CHANNEL SETTING Setting a tuning stepThe tuning step can be selected for each frequency band.The following tuning steps are available for the IC-E91.• 5.0 kHz* • 6.25 kHz* • 8.33 kHz† • 9.0 kHz‡ • 10.0 kHz• 12.5 kHz • 15.0 kHz • 20.0 kHz • 25.0 kHz • 30.0 kHz• 50.0 kHz • 100.0 kHz • 125.0 kHz • 200.0 kHz* Appears for below the 600 MHz bands only.† Appears for the VHF air band only.‡ Appears for the AM broadcast band only.DD Tuning step selectionq Push [VFO] to select VFO mode, if necessary.w Push [BAND] to select the desired frequency band.• Or, while pushing and holding [BAND], rotate [DIAL] to selectthe desired frequency band.e Push and hold [TS](8) for 1 sec. to enter tuning step set mode.r Rotate [DIAL] to select the desired tuning step.t Push [TS](8) (or [VFO]) to return to VFO mode. Setting a frequencyDD Using the dialq Push [VFO] to select VFO mode, if necessary.w Select the desired frequency band with [BAND].• Or, while pushing and holding [BAND], rotate [DIAL] to selectthe desired frequency band.e Rotate [DIAL] to select the desired frequency.• The frequency changes according to the preset tuning steps.See the left-hand side of the page to set the tuning step.• Push and hold [MHz](VFO) for 1 sec. then rotate [DIAL] tochange the frequency in 1 MHz steps, or push and hold for 1 sec.again then rotate [DIAL] to change the frequency in 10 MHzsteps. (Each pushing and holding for 1 sec. toggles 1 MHz or10 MHz tuning steps. Push [MHz](VFO) to cancel it.)APRIOPRIO WXWX EMREMRDTCSDTCSFMFM145 000+DUP+DUP25APRIOPRIO WXWX EMREMRDTCSDTCSFMFM145 000+DUP+DUP25[DIAL][DIAL] changes the fre-quency according to the se-lected tuning step.After pushing and holding[MHz](VFO) for 1 sec.,[DIAL] changes the frequen-cy in 1 MHz/10 MHz steps.APRIOPRIO WXWX EMREMRDTCSDTCSFMFM145 000P+DUP+DUP25SET-TS:5.0kHzμ 000000SKIP[DIAL]5 kHz tuning step