447 DV MODE OPERATION (Optional UT-121 is required)DD Repeater operation into another zoneqSet the desired repeater’s frequency, offset and shift direc-tion in B band. (pgs. 18, 32)• Select DV mode in advance.w Set your own call sign. (p. 38)• See p. 34 for your own call sign programming.e Set the desired station call sign. (p. 39)• When making a CQ callSet the desired repeater’s (in a different zone) call sign witha “/” symbol at the 1st digit, for the area in which youwant to make a CQ call, into “UR.”• See p. 36 for station call sign programming.r Set the repeater’s call sign as follows;z Enter “R1” in call sign set mode.xRotate [DIAL]† to select the nearest repeater’s call sign.• If the nearest repeater is gateway repeater, select the re-peater’s call sign with “G” setting at the 8th digit.cPush [ï](5) to set the call sign for “R1.”• Return to CALL SIGN screen.vRotate [DIAL]† to select “R2” then push [ï](5)†.bRotate [DIAL]† to select the gateway repeater’s (in thesame zone) call sign.• The call sign should have “G” setting at the 8th digit.• When gateway repeater call sign is set in “R1,” select “NOTUSE✱” for “R2” setting.nPush [ï](5) to set the call sign for “R2.”• Return to CALL SIGN screen.mPush [MENU/LOCK] to return to frequency indication.t Push [PTT] to transmit; release to receive.UR:CQCQCQUR:CQCQCQR1:RPT1AAR1:RPT1AAR2:NOT USE*R2:NOT USE*MY:MYCALLMY:MYCALL/IC91/IC91CALL SIGNrMENU screen ➪ CALL SIGN ➪ R1(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)
