10612 OTHER FUNCTIONS Setting DTMF transfer speedThe DTMF transfer speed can be selected.q Enter “DTMF SPEED” in DUP/TONE… set mode. (p. 99)w Rotate [DIAL]† to select DTMF transfer speed as below.100: Transfer the DTMF data per about 100 msec.200: Transfer the DTMF data per about 200 msec.300: Transfer the DTMF data per about 300 msec.500: Transfer the DTMF data per about 500 msec.e Push [ï](5) (or [ΩΩ](4)) to return to DUP/TONE… set mode,and push [MENU/LOCK] to return to frequency indication. Tone frequency and DTCScodeD Subaudible (repeater) toneSome repeaters require subaudible tones to be accessed.Subaudible tones are superimposed over your normal signaland must be set in advance.D Tone and DTCS squelchesThe tone squelch (CTCSS) or DTCS squelch opens onlywhen receiving a signal containing a matching subaudibletone or DTCS code, respectively. You can silently wait forcalls from group members using the same tone or code. Sep-arate tone frequencies can be set for repeater and tonesquelch/pocket beep operation.D Pocket beepThese functions use subaudible tones or DTCS codes forcalling and can be used as a “common pager” to inform youthat someone has called while you were away from the trans-ceiver.DV SET MODESCANrDUP/TONE...***** MENU *****r100100200200500500300300DTMF SPEEDMENU screen ➪ DUP/TONE... ➪ DTMF SPEED(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)
