8410 PRIORITY WATCHDD VFO scan watchq Set the watching channel(s).For memory channel watch:Select the desired memory channel.For call channel watch:Select the desired call channel.For memory scan watch:Select memory mode, or the desired bank group; then,push and hold [SCAN](2) for 1 sec. to start memory/bankscan.w Enter “PRIO WATCH” in scan set mode. (p. 96)e Rotate [DIAL]† to select “ON.”• Select “BELL” if the priority beep function is desired.r Push [VFO] to exit scan set mode and start the watch.• “PRIO” indicator appears.tPush and hold [SCAN](2) for 1 sec. to enter scan type se-lection condition.yRotate [DIAL] to select the desired scan type from “ALL,”“BAND” and “PROG-xx (xx= 0–24),” “DUP.”u Release [SCAN](2) to start the VFO scan watch.• The transceiver checks the memory/bank channel(s) or callchannel every 5 sec.• The watch resumes according to the selected scan resume con-dition. (p. 81)i Push [VFO] to cancel the watch.• During priority watchSearches VFO frequenciesfor 5 sec.Pauses on a memory orcall channel when a sig-nal is received.• During priority watch with priority beepEmits beep and blinks “S” indicator when a signal is re-ceived on a memory or call channel.PRIOPRIOFMFMA 145 000μ 000000PRIOPRIOFMFMA 888 800P SKIPSKIPPRIOPRIOFMFMA 145 000μ 000000PRIOPRIOFMFMA 888 800P SKIPSKIPMENU screen ➪ SCAN ➪ PRIO WATCH(Push [MENU/LOCK]) (Rotate [DIAL]†, then push [ï](5)†.)†[DIAL] ↔ [∫∫](2)/[√√](8) [ï](5) ↔ [≈≈](6)
