Kaba SIMPLEX L1000 Series Installation Instructions Manual

Also see for SIMPLEX L1000 Series: Manual

Contents

20KABA SIMPLEX® L1000 SERIESLIMITED WARRANTYKaba Access Control warrants this product to be free from defects in materialand workmanship under normal use and service for a period of three (3) years.Kaba Access Control will repair or replace, at our discretion, L1000 Series Locksfound by Kaba Access Control analysis to be defective during this period. Ouronly liability, whether in tort or in contract, under this warranty is to repair orreplace products that are returned to Kaba Access Control within the three (3)year warranty period.This warranty is in lieu of and not in addition to any other warranty or condi-tion, express or implied, including without limitation merchantability, fitness forpurpose or absence of latent defects.ATTENTION: This warranty does not cover problems arising out of improperinstallation, neglect or misuse. All warranties implied or written will be null andvoid if the lock is not installed properly and/or if any supplied component partis substituted with a foreign part. If the lock is used with a wall bumper, thewarranty is null and void. If a doorstop is required, we recommend the use of afloor secured stop.The environment and conditions of use determine the life of finishes on KabaAccess Control products. Finishes on Kaba Access Control products are subjectto change due to wear and environmental corrosion. Kaba Access Control can-not be held responsible for the deterioration of finishes.Authorization to Return GoodsReturned merchandise will not be accepted without prior approval. Approvalsand Returned Goods Authorization Numbers (RGA Numbers) for the L1000Series are available through our Customer Service department in Winston-Salem, NC 800.849.8324. The serial number of a lock is required to obtainthis RGA Number. The issuance of an RGA does not imply that a credit orreplacement will be issued.The RGA number must be included on the address label when material isreturned to the factory. All component parts including latches and strikes (evenif not inoperative) must be included in the package with return. All merchandisemust be returned prepaid and properly packaged to the address indicated.