Kenwood KRF-X9992D Connection And Setup Manual

Also see for KRF-X9992D: User guide Service manual

Contents

11Chapter One : Connecting Your Devices Audio-Video Receiver KRF-X9992DConnectionsConnecting Your Cable TV or Satellite Tuner, continuedDo not plug in the receiver or devices to AC poweruntil you have connected all your devices.This section focuses on the connections from yourcable or satellite tuner to the KRF-X9992D. Pleaserefer to your tuner’s instructions for more detailabout its connection jacks and capabilities.The instructions in this section show one of severalpossible variations on connecting your tuner. Forfurther assistance on optional configurations,contact your cable or satellite provider.To Connect a Cable TV Tuner with aComposite (RCA) Video Output:1. Review the information under “Before YouBegin” on page␣ 1. It contains important notesabout the types of video connections you canmake.2. Connect the audio and video cables from thecable tuner’s Audio and Video Out jacks to thereceiver’s VIDEO 2, VIDEO 3, or VIDEO 4 PLAYIN jacks as shown to the left.3. Go to “Noting Your Devices” on page␣ 3 and notewhich jack you used to connect your tuner. Inaddition, note the brand name and modelnumber of the tuner.To Connect a Cable TV Tuner without aComposite (RCA) Video Output:1. Review the information under “Before YouBegin” on page␣ 1. It contains important notesabout the types of video connections you canmake.2. Connect the audio cables from the cable tuner’sAudio Out jacks to the receiver’s VIDEO 2,VIDEO 3, or VIDEO 4 PLAY IN jacks as shown tothe left.3. Leave the cable tuner’s video out (RF jack)connected directly to your VCR or TV (whereveryou already have it connected). See “How Do IOperate Devices?” on page␣ 26 of the Users’ Guidefor details about using this setup.4. Go to “Noting Your Devices” on page␣ 3 and notewhich jack you used to connect your tuner. Inaddition, note the brand name and modelnumber of the tuner.To Connect a Satellite Tuner:1. Review the information under “Before YouBegin” on page␣ 1. It contains important notesabout the types of video connections you canmake.2. If your satellite receiver has a digital output, usethe table below to select a jack set:Note that the jack sets are linked, even thoughthey are not adjacent. You must connect all ofthe cables from your satellite receiver to a linkedjack set. For example, if you connect the analogcables to VIDEO2 and the digital optical cable toVIDEO4,␣ your satellite receiver will not workcorrectly.3. Connect the audio and video cables from thesatellite tuner’s Audio and Video Out jacks to thereceiver’s VIDEO 2, VIDEO 3, or VIDEO 4 PLAYIN jacks as shown to the left.4. Go to “Noting Your Devices” on page␣ 3 and notewhich jack you used to connect your tuner. Inaddition, note the brand name and modelnumber of the tuner.optical VIDEO4coaxial VIDEO2 or 3If your digitalcable is...Choose this jackset...